Change type of registration

Change type of registration

In letsGrow.com, manual data can be entered in several ways. This can be done through the app or through the platform. The difference between the two is that you can register multiple locations (plants) through the app.

To do the registrations on a plant-level , such as "head thickness - mm", which you would want to register for each individual plant, you must set the item "head thickness - mm" in the module to multiple registration. This can be done by following the steps below. Note that when an item is set to "multiple" through the app, the data cannot be entered through the platform (desktop), however, the data can be edited through the platform (desktop) to correct any errors.
  1. Open the app and log in with your MyLetsGrow account.
  2. Click the green "change module" button and select the relevant module (see image below).
  3. Then click the green "settings" button at the bottom of the screen (see image below).
    1. If this button is no longer present and you see the "send data" button instead, you must first send the data and then the "settings" button will become available again.

  1. Then click the "set multiple items" button" (see image below).

  1. In the next screen you can turn on or off the items that you do or do not want to register per plant (or per location). When the slider is green, it means that the item is turned on for multiple registrations.